Hi,
Can you guys help a complete beginner to the Enterprise world?
I’ve recently added an Enterprise 128 to my collection. I have an IS-Basic cartridge and one of Pear’s EXDOS floppy interface cards for the expansion bus. I can power the Enterprise and the EXDOS board from a suitable 9v 2a psu; the machine boots fine, runs a few initial tests and then enters IS-Basic. I can enter the Word Processor and I can exit back to IS-Basic.
I can’t get anything else to work though, and I can’t access the EXDOS interface.
If I type :help I get something like ***not understood.
The problem is I can’t find online a beginners guide to get my head around what EXOS commands should work.
Is there a way I can test the EXDOS interface? :EXDOS also returns ***not understood
Should the EXDOS interface be tested during the boot process? Does it have to have a floppy drove or Gotek (or similar) interface to become active? The problem is I don’t know if the machine is faulty or the floppy interface card, or both! Or just me!
Can someone provide a quick tutorial or link to getting started with the Enterprise? I have a Gotek on the way so I hope to add some disk images to that if I can get things running.
Thanks!