Enterprise Forever

:UK => Wanted => Topic started by: JCCyC on 2015.April.30. 06:11:44

Title: RGB cable WITHOUT a SCART connector at the other end
Post by: JCCyC on 2015.April.30. 06:11:44

I, too, am in need of an RGB cable. Even though I live in Brazil, I have monitors that accept 50 Hz, 15 kHz RGB. But they don't have a SCART connector, they have a VGA DE-15 female connector with R, G, B, HSync, VSync and ground in the usual places. Audio goes to a female stereo P2 plug in the monitor.

I could very easily build this cable out of Zozosoft's cable, but it'd be a waste to cut off the SCART connector. I'd be happy with either the E128 compatible edge connector only, ot it wired to a cable and nothing on the other side.

Title: Re: RGB cable WITHOUT a SCART connector at the other end
Post by: Tuby128 on 2015.April.30. 11:52:44

Dear Sir,

 I think i did not understand, what you want, maybe this helps you:
 If you able to find an old PC motherboard (in second hand old computer parts store, or ebay, every pentium 1 motherboard has this slot) you can cut out and unsolder the ISA slot.
http://pt.wikipedia.org/wiki/ISA
 
 You only need 2x7 pole to connect to the Enterprise, simply cut with a saw. From one ISA slot you can make more connector.

Title: Re: RGB cable WITHOUT a SCART connector at the other end
Post by: Zozosoft on 2015.April.30. 12:03:24

For example (http://www.ebay.com/itm/5pc-Industrial-Card-Edge-Slot-Socket-Connector-25x2P-50P-2-54mm-0-1-3A-/140888533934?pt=LH_DefaultDomain_0&hash=item20cd9c6bae) but you can find it at lot of sellers (at various sizes). Need to cut for monitor connector size.
The good in the edge connectors: you get one longer, and then can be cutted for all connectors on the Enterprise :-)