ENTERPRISE KLUB
2019. szeptember 7., 1055 Budapest, Nyugati tér 9. 14-19 óráig
Részletek
Welcome, Guest. Please login or register.


Author Topic: Enterprise Case Screws (Read 630 times)

Offline keyboardjunkie

  • Beginner
  • *
  • Posts: 26
  • Country: gb
  • Ad Vitam Paror
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Firefox 67.0 Firefox 67.0
    • View Profile
Enterprise Case Screws
« on: 2019.June.01. 21:04:26 »
Hi All,

Can anyone tell me where I can get a hold of 2 complete sets of case and motherboard screws for the Enterprise?  I have a 128 and a 64 both without any screws holding them together...

I also need the little rubber joystick ring that sits below the joystick on my 64, and also a joystick cap?

Alternatively, can anyone tell me what size of screws are required?

Thanks!

Mark.

Offline gflorez

  • EP addict
  • *
  • Posts: 2605
  • Country: es
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 67.0 Firefox 67.0
    • View Profile
Re: Enterprise Case Screws
« Reply #1 on: 2019.June.02. 20:16:40 »
Some time ago, about a year now, I bought some well made caps to an Hungarian guy here.
« Last Edit: 2019.June.02. 20:20:14 by gflorez »

Offline gflorez

  • EP addict
  • *
  • Posts: 2605
  • Country: es
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 67.0 Firefox 67.0
    • View Profile
Re: Enterprise Case Screws
« Reply #2 on: 2019.June.02. 22:24:41 »
A brief description of the screws used can be found on page 40 of the "Enterprise-Code-Book_Parts-and-Suppliers" on Zozo's Enterprise information page:

23567-0

Offline Zozosoft

  • EP addict
  • *
  • Posts: 13431
  • Country: hu
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Firefox 67.0 Firefox 67.0
    • View Profile
    • http://enterprise.iko.hu/
Re: Enterprise Case Screws
« Reply #3 on: 2019.June.03. 11:40:35 »

Offline gflorez

  • EP addict
  • *
  • Posts: 2605
  • Country: es
  • OS:
  • Unknown Unknown
  • Browser:
  • Firefox 67.0 Firefox 67.0
    • View Profile
Re: Enterprise Case Screws
« Reply #4 on: 2019.June.03. 12:44:11 »
And, are they good for the task? Are, they exactly the same or similar?

Offline gflorez

  • EP addict
  • *
  • Posts: 2605
  • Country: es
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 67.0 Firefox 67.0
    • View Profile
Re: Enterprise Case Screws
« Reply #5 on: 2019.June.07. 13:54:35 »
I have bought the screws.

Later, searching on Ebay for "Silicone washer", I have found this product that can suit us:



The thickness of the real ring is about 2,35mm, this is 2mm, also there is no 27mm for the inner diameter, so select 26, but there is 42mm for the outer diameter. Also, the elasticity and hardness could be different, but it worths the try.


Offline Zozosoft

  • EP addict
  • *
  • Posts: 13431
  • Country: hu
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Firefox 68.0 Firefox 68.0
    • View Profile
    • http://enterprise.iko.hu/
Re: Enterprise Case Screws
« Reply #6 on: 2019.July.24. 11:52:01 »
I also need the little rubber joystick ring that sits below the joystick on my 64, and also a joystick cap?
Are you still looking for these?