Welcome, Guest. Please login or register.


Author Topic: Quick note to say hi! (Read 13881 times)

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: Quick note to say hi!
« Reply #15 on: 2014.September.16. 17:36:13 »
It seems to be like the EDC Windows but better....

Offline NickMilner

  • Newbie
  • Posts: 12
  • Country: gb
Re: Quick note to say hi!
« Reply #16 on: 2014.September.16. 20:17:59 »
Ok, so the bad news is that one of my disks was completely hosed and one had damaged files.  The good news is that the hosed disk was just my master IS-DOS disk and I had a backup (and you probably have this stuff anyway).  The better news is that both of the EGI disks were ok. :)

I've zipped up the 5 disks I had and attached it.  I'm going to go out on a limb and guess that no one is going to want to pursue me through the courts for piracy at this point!

I'm afraid I don't have any documentation or a working Enterprise (my power cable is FUBAR but the machine itself might be ok) so I can't help you out.  I'm sure you'll figure it out though.

It's funny, I was looking at some old posts about the EGI and it has something of a mythical reputation.  I'm glad I can finally make it real - I hope it works!

Let me know how you get on. :)

Offline endi

  • EP addict
  • *
  • Posts: 7298
  • Country: hu
  • grafikus, játékfejlesztõ, programozás, scifi, tudományok, vallás
    • Honlapom
Re: Quick note to say hi!
« Reply #17 on: 2014.September.16. 20:47:03 »
historical moments! there are new EP programs! wow :)
Vigyázat! Szektás vagyok! :)

Offline jltursan

  • User
  • *
  • Posts: 69
  • Country: es
    • JLTurSan's MSX page - My little MSX corner
Re: Quick note to say hi!
« Reply #18 on: 2014.September.16. 20:56:03 »
And it works too!!



Sadly, ep128emu doesn't support the mouse and it seems that it's the only input device...

Offline endi

  • EP addict
  • *
  • Posts: 7298
  • Country: hu
  • grafikus, játékfejlesztõ, programozás, scifi, tudományok, vallás
    • Honlapom
Re: Quick note to say hi!
« Reply #19 on: 2014.September.16. 20:58:06 »
my found, this switch the text mode to graphics-text mode, and it works on the basic editor!
Vigyázat! Szektás vagyok! :)

Offline geco

  • EP addict
  • *
  • Posts: 7085
  • Country: hu
    • Támogató Támogató
Re: Quick note to say hi!
« Reply #20 on: 2014.September.16. 21:23:54 »
Quote from: NickMilner
Ok, so the bad news is that one of my disks was completely hosed and one had damaged files.  The good news is that the hosed disk was just my master IS-DOS disk and I had a backup (and you probably have this stuff anyway).  The better news is that both of the EGI disks were ok. :)

I've zipped up the 5 disks I had and attached it.  I'm going to go out on a limb and guess that no one is going to want to pursue me through the courts for piracy at this point!

I'm afraid I don't have any documentation or a working Enterprise (my power cable is FUBAR but the machine itself might be ok) so I can't help you out.  I'm sure you'll figure it out though.

It's funny, I was looking at some old posts about the EGI and it has something of a mythical reputation.  I'm glad I can finally make it real - I hope it works!

Let me know how you get on. :)
Great :smt041 :smt041 :smt041 :smt041 :smt041
Thank you very much :)

Offline NickMilner

  • Newbie
  • Posts: 12
  • Country: gb
Re: Quick note to say hi!
« Reply #21 on: 2014.September.16. 22:47:41 »
I seem to remember the EGI crashed a lot. ;)  It was pre-release software though and very cutting edge, so understandable.  There's probably a lot of assembly language crap of mine on their too - hope it's not too embarassing!

Online Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14723
  • Country: hu
    • http://enterprise.iko.hu/
Re: Quick note to say hi!
« Reply #22 on: 2014.September.17. 09:20:06 »
Thank you very much!!!

Offline fatbob_gb

  • Newbie
  • Posts: 16
  • Country: gb
Re: Quick note to say hi!
« Reply #23 on: 2014.September.17. 09:24:56 »
This has definitely turned into the best "hi to a forum" thread that I have seen for a very long time.

Hi, Welcome & thank you.

Offline NickMilner

  • Newbie
  • Posts: 12
  • Country: gb
Re: Quick note to say hi!
« Reply #24 on: 2014.September.17. 10:15:22 »
You're welcome, and thanks!

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: Quick note to say hi!
« Reply #25 on: 2014.September.17. 11:19:08 »
These discs deserve a new thread, I think...

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: Quick note to say hi!
« Reply #26 on: 2014.September.17. 15:38:17 »
The disks in images:

Offline Z80System

  • EP addict
  • *
  • Posts: 3848
  • Country: hu
Re: Quick note to say hi!
« Reply #27 on: 2014.September.17. 16:06:50 »
Quote
you can see a screenshot of the WIMP GUI in the picture, above.  
What does it mean "WIMP" ? I do not understand ... What is it ? I understood EGI is the name of the GUI ... What is WIMP ?
Z80 System

Offline Z80System

  • EP addict
  • *
  • Posts: 3848
  • Country: hu
Re: Quick note to say hi!
« Reply #28 on: 2014.September.17. 16:11:56 »
How we read in the hungarian interview, EGI is a GUI of EXOS 3.0.

So it is the GUI of the new and never seen OS of a new and never seen EP.

But in this case, EGI is a standalone application, packaged to a mouse hardware for the "current" EP what we know... So ... what is EGI for real ? Are we sure, this EGI is that EGI mentioned in the hungarian interview?
Z80 System

Offline Z80System

  • EP addict
  • *
  • Posts: 3848
  • Country: hu
Re: Quick note to say hi!
« Reply #29 on: 2014.September.17. 16:20:36 »
NickMilner, have you any issues to add:

http://enterprise.iko.hu/magazines.htm
Z80 System