Welcome, Guest. Please login or register.


Author Topic: 3D printer model for Basic module case? (Read 3840 times)

Offline Prodatron

  • EP user
  • *
  • Posts: 256
  • Country: de
  • Back on the Z80
    • http://www.symbos.de
3D printer model for Basic module case?
« on: 2015.May.08. 17:06:25 »
I would like to put my SD card interface into a case. As it is designed to fit in the Basic module cases, I could use this, but I don't want to "destroy" one of them for the SD card opening/slot, but such an opening would be very helpfull. A friend of my has a 3D printer, and I wonder, if anyone here already thought about printing these cases? Making the screw thread will be probably difficult, even with its resolution of <0.1mm (or wouldb't it?), but maybe it's still possible to seize a screw in a stable way.

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: 3D printer model for Basic module case?
« Reply #1 on: 2015.May.08. 17:46:50 »
I found this Web page two months ago.

May be he has other designs..


Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: 3D printer model for Basic module case?
« Reply #3 on: 2015.May.08. 20:27:04 »
This, from the same designer, seems to be for the prototype SD-reader.

It doesn't have the inner pillar.

Edit: it has, but not centered.
« Last Edit: 2015.May.09. 14:10:07 by gflorez »

Offline Prodatron

  • EP user
  • *
  • Posts: 256
  • Country: de
  • Back on the Z80
    • http://www.symbos.de
Re: 3D printer model for Basic module case?
« Reply #4 on: 2015.May.09. 14:40:25 »
@SlashNet, thanks for the link to the other thread, I was sure, there was already such an idea here.
This, from the same designer, seems to be for the prototype SD-reader.
@Gflorez: Cool, I will try this one!

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: 3D printer model for Basic module case?
« Reply #5 on: 2015.May.09. 23:32:46 »
This project-object hasn't the original size, it is made shorter for the prototype SD-reader. The premium(definitive) version is what you have and only fits on a regular cartridge.

Better modify the design before printing.


Offline SzörG

  • EP fan
  • *
  • Posts: 224
  • Country: hu
    • ReTRo Tauta
Re: 3D printer model for Basic module case?
« Reply #6 on: 2015.May.12. 15:49:22 »
This, from the same designer, seems to be for the prototype SD-reader.

It doesn't have the inner pillar.

Edit: it has, but not centered.


Yes, of course :-) this a box unto a SD prototype card.
the 3D printable plan for SD Premium Adapter is not ready yet, but promised by Laci70 :-)