Welcome, Guest. Please login or register.


Author Topic: Can't get the case open and don't want to force it (Read 7092 times)

Offline Getafix

  • Newbie
  • Posts: 6
  • Country: ca
Can't get the case open and don't want to force it
« on: 2020.July.29. 01:34:40 »
Hi,

I am new to the Enterprise.  I just got an EP64 I bought on eBay.  When I unpacked it, there was a piece of metal rattling around inside.  I took out all the scews I could see, but I still can't get the case open.  It's really stuck at the back by the monitor socket.  I have pried it a bit but if I go any harder I'll damage the plastic for sure.  The piece of copper fell out along the way, so I really want to put it back in.  Is there a trick to getting the case loose at the back, or should I just persist with more force?

Some of my keys are also dead, but if I lift the membrane and push on it with my fingers from both sides, then the keystrokes do go through.  I haven't serached to forum to see if there's a way to open and clean the membrane but of someone has a thought I'd like to hear.

Thank you
Stefan

Offline Dr.OG

  • Global Moderator
  • EP lover
  • *
  • Posts: 776
  • Country: hu
  • dr.
Re: Can't get the case open and don't want to force it
« Reply #1 on: 2020.July.29. 05:59:41 »
If I remembet correctly there's a hidden screw behind the sticker on the bottom of the computer, and also two black screws holding the heatsink at the back of the computer on the left.
ÉN ekelek, TE keregsz, Ő gyeleg,
MI ákolunk, TI vornyáztok, ŐK lendeznek.

Offline Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14779
  • Country: hu
    • http://enterprise.iko.hu/
Re: Can't get the case open and don't want to force it
« Reply #2 on: 2020.July.29. 10:28:43 »
I took out all the scews I could see, but I still can't get the case open.  It's really stuck at the back by the monitor socket.
One hidden screw under the warranty label.
With a hairdryer and knife you can carefully lift up the corner of the label, if you don't want to break it.

Quote
The piece of copper fell out along the way, so I really want to put it back in.
It is a heatshink of the video chip. Good idea put it back :-)

Quote
Some of my keys are also dead, but if I lift the membrane and push on it with my fingers from both sides, then the keystrokes do go through.
The most common failure it is break at the motherboar connection (after the 30+ years), because it was bent at a sharp angle.. Need to cut few milimeters, then broken part, then will work again. 

Offline Getafix

  • Newbie
  • Posts: 6
  • Country: ca
Re: Can't get the case open and don't want to force it
« Reply #3 on: 2020.July.30. 03:02:48 »
Thank you.  Got the case open after finding the hidden screw.  Sadly, my keyboard membrane has probably already been cut.  It's very short on the left.  I will have a hard time getting it back in - I have big hands :(

I can see that the end of the connector is dead but if I measure up about 6 mm from the edge, it does work, but I won't be able to cut that much off and get it back in.  I ordered a conductive silver pen - I'll see if I can fix it.

Is there a trick to the keyboard connector on the motherboard or do I just need to force the cable in there?  I think that's how it got bent before.  I saw a thread about new keyboard membranes.  Should I just keep a look out for a post there, or does anyone know where I can ordera new one right now?

Thank you all for all your help and advice. :)

Online Judge

  • EP lover
  • *
  • Posts: 718
  • Country: hu
Re: Can't get the case open and don't want to force it
« Reply #4 on: 2020.July.30. 23:49:47 »
Try buying a new one here:

http://www.commodoreszerviz.hu/billentyuzet_folia.htm

[ Guests cannot view attachments ]

facebook: CommodoreSzerviz
e-mail: info@commodoreszerviz.hu
Üdv.Judge

Offline Getafix

  • Newbie
  • Posts: 6
  • Country: ca
Re: Can't get the case open and don't want to force it
« Reply #5 on: 2020.July.31. 01:43:46 »
Try buying a new one here

Perfect,  thank you very much! :)

Offline John Fante

  • EP fan
  • *
  • Posts: 176
  • Country: dk
Re: Can't get the case open and don't want to force it
« Reply #6 on: 2020.July.31. 08:42:00 »
@Getafix: Could you give us a report on how it goes buying the nem membrame?

Will soon be needing a new one my self :)

Offline Getafix

  • Newbie
  • Posts: 6
  • Country: ca
Re: Can't get the case open and don't want to force it
« Reply #7 on: 2020.July.31. 18:17:10 »
@Getafix: Could you give us a report on how it goes buying the nem membrame?

Will do.  I have sent an email.  I'll report back with whatever outcome.

Will soon be needing a new one my self :)

That's too bad :(  Let's hope there's success for all of us in this.    This is my 1st Enterprise.  I want to make a game for it but then I want to play it on actual hardware :)

Offline Getafix

  • Newbie
  • Posts: 6
  • Country: ca
Re: Can't get the case open and don't want to force it
« Reply #8 on: 2020.August.03. 18:15:15 »
http://www.commodoreszerviz.hu/billentyuzet_folia.htm
This person is very nice, and very efficient.  Replied immediately and we had a few back-and-forth emails over the weekend.  The new keyboard membrane is in the mail to me already. 

At this time, the price before shipping was 8.000 HUF (EUR 23 and USD 27) which, in my opinion, is reasonable. 

I will report back once I have received the new keyboard membrane. 


Online Judge

  • EP lover
  • *
  • Posts: 718
  • Country: hu
Re: Can't get the case open and don't want to force it
« Reply #9 on: 2020.August.03. 18:58:44 »
This is good news. I'm glad you get the foil. :smt023
Üdv.Judge

Offline gflorez

  • EP addict
  • *
  • Posts: 3615
  • Country: es
    • Támogató Támogató
Re: Can't get the case open and don't want to force it
« Reply #10 on: 2020.August.03. 21:01:17 »
I have tried the English membrane(It seems it is no more being offered on the Sellmyretro web page) and the Hungarian one, being the second a lot better and cheaper. 

Offline Getafix

  • Newbie
  • Posts: 6
  • Country: ca
Re: Can't get the case open and don't want to force it
« Reply #11 on: 2020.August.29. 04:10:24 »
The new membrane arrived today.   It's a quality piece with a little bit of a plastic support for where you need to push it into the connector.  Maybe that support is standard - my original foil was at least 3cm shorter than the new one so maybe it had that support but that was all cut away already.  My original was so short I couldn't really get it back in, I would have to get someone with small hands to do it.

Anyway, it inserted without issue and works perfectly!  I am extremely pleased. 

You can buy this one with confidence. :)

Offline John Fante

  • EP fan
  • *
  • Posts: 176
  • Country: dk
Re: Can't get the case open and don't want to force it
« Reply #12 on: 2020.August.29. 08:52:51 »
Great to hear! Thank you for the feed back/review :)

Online Judge

  • EP lover
  • *
  • Posts: 718
  • Country: hu
Re: Can't get the case open and don't want to force it
« Reply #13 on: 2020.August.29. 10:05:23 »
The new membrane arrived today.   It's a quality piece with a little bit of a plastic support for where you need to push it into the connector.  Maybe that support is standard - my original foil was at least 3cm shorter than the new one so maybe it had that support but that was all cut away already.  My original was so short I couldn't really get it back in, I would have to get someone with small hands to do it.

Anyway, it inserted without issue and works perfectly!  I am extremely pleased.  

You can buy this one with confidence. :)

:smt006  :smt026
Üdv.Judge