Enterprise Forever
:UK => Hardware => Maintenance => Topic started by: Prodatron on 2015.May.08. 17:06:25
-
I would like to put my SD card interface into a case. As it is designed to fit in the Basic module cases, I could use this, but I don't want to "destroy" one of them for the SD card opening/slot, but such an opening would be very helpfull. A friend of my has a 3D printer, and I wonder, if anyone here already thought about printing these cases? Making the screw thread will be probably difficult, even with its resolution of <0.1mm (or wouldb't it?), but maybe it's still possible to seize a screw in a stable way.
-
I found this (http://www.thingiverse.com/thing:405294/#files) Web page two months ago.
May be he has other designs..
-
http://enterpriseforever.com/hardware/new-cartridge-bodies/msg34418/#msg34418
-
This (http://www.thingiverse.com/thing:405343/#files), from the same designer, seems to be for the prototype SD-reader.
It doesn't have the inner pillar.
Edit: it has, but not centered.
-
@SlashNet, thanks for the link to the other thread, I was sure, there was already such an idea here.
This (http://www.thingiverse.com/thing:405343/#files), from the same designer, seems to be for the prototype SD-reader.
@Gflorez: Cool, I will try this one!
-
This project-object hasn't the original size, it is made shorter for the prototype SD-reader. The premium(definitive) version is what you have and only fits on a regular cartridge.
Better modify the design before printing.
-
This (http://www.thingiverse.com/thing:405343/#files), from the same designer, seems to be for the prototype SD-reader.
It doesn't have the inner pillar.
Edit: it has, but not centered.
Yes, of course :-) this a box unto a SD prototype card.
the 3D printable plan for SD Premium Adapter is not ready yet, but promised by Laci70 :-)