Yes, now there are more than 23 Adapters.
but this year we did not again fulfill manufactured ...

nothing can be done, the third batch shortly in progress!

SD ROM version 0.4:
-Internal redesign, now can be used SD and IDE at once. SD and EXDOS ROM can be placed in any order. (Possible use EXDOS ROM from the EXDOS card)
-started redesign the startup screen, replacing the old running debug informations If any key pressed during the SD initialization, then will wait for ESC key at the end

ROM pack version:
FT: standard pack, with Hungarian Quick test screen
FTU: standard pack, with English Quick test screen
FEPD: instead Quick test and Basic, EPDOS 1.9 beta (for machines with upgraded EXOS)
FBRD: instead Quick test, BRD expansion
FESP: instead Quick test, ESP expansion for Spanish users, Gflorez asked it

It can work, but currently needs some trick.
The EXDOS has a bug, it freezes when the floppy controller isn't present. Then the floppy support is disabled in the EXDOS ROM installed to the SD adapter. Then it can be used stand alone.
If you want to use floppy:
-if the EXDOS card uses EXDOS 1.4 then don't install EXDOS ROM to SD (with SDEXT 0.4)
-another way install floppy supported EXDOS to the SD
-if 1.4 is on EXDOS card, then use RL command from Zozotools, replace the EXDOS ROM in the ROM list

Or wait for the bugfixed version, I hope I will create it soon.

Here is UK version which I used for WD1772 chip.

New ROM pack:
- SDEXT updated to 0.5
- EXDOS updated to final 1.4, now also can handle floppy (previously the floppy support removed, because originaly EXDOS freezee without the floppy controller)
- ROMs with FILE now updated to 1.4, with EnterMice support

It may be 1772.
Reading from disk will be slightly faster.

ROM pack updated with SDEXT 0.6
-SDXC card size now correctly detected
-some vintage MMC cards which were not detected previously, work now

At the ROM pack, ESB Spanish version has been added to Gflorez