Author Topic: Enterprise All-In-One interface (Read 62037 times)

Z80System · « **Reply #90 on:** 2016.February.18. 19:05:51 »

And when will you announce a hardware snapshot function for the EP, at last ?

I would like to play on a real-steel machine with savegames ...

pear · « **Reply #91 on:** 2016.February.18. 19:08:04 »

Maybe able to make it smaller than the original EXDOS.
The bus-bridge will be superfluous.

A hardware snapshot function ?
When "floors" will be done and tested.

Z80System · « **Reply #92 on:** 2016.February.18. 19:10:26 »

Wow2!

Wow3!

pear · « **Reply #93 on:** 2016.February.18. 19:17:22 »

For the tests, I'll try to design the maximum possible configuration able to connecting with the EP.
I do not know if it will work. Still poorly I know the Enterprise (just three years ago I did not know that this existed

).

Zozosoft · « **Reply #94 on:** 2016.February.18. 19:20:02 »

Quote from: Z80System on 2016.February.18. 19:05:51

And when will you announce a hardware snapshot function for the EP, at last ?

I think it is near to impossible

My question is more easy: sprite unit?

Z80System · « **Reply #95 on:** 2016.February.18. 19:37:11 »

Quote

I think it is near to impossible

Near to impossible doing one 98% working one,

or near to impossible doing a 100% working one ?

pear · « **Reply #96 on:** 2016.May.14. 19:59:07 »

I did launch today the new FlexiBridge and I did the first tests of the card RAM/Flash/Clock.
Memory in slots RAM2-RAM6 passed the test successfully.
In slot FlashROM_RAM1 working properly both as Flash and as RAM (jumper).
Each of the memory chips (512K), you can individually turn off without removing it from the socket (dip-switch).
The RTC chip didn't install yet. I've got also a bit of work on the PLD.

Is the test at startup can detect the Flash memory ?

Zozosoft · « **Reply #97 on:** 2016.May.14. 21:06:23 »

Wow!

Quote from: pear on 2016.May.14. 19:59:07

Is the test at startup can detect the Flash memory ?

As chip type? Currently no.

If you write lot of roms to it, then you can test it is working.

gflorez · « **Reply #98 on:** 2016.May.14. 21:42:37 »

3200kb of Ram... Whoaaa! I get dizzy only thinking on it....

Wait, we are on year 2016.....

Ep128 · « **Reply #99 on:** 2016.May.14. 23:36:34 »

Nice!

Bagpuss22 · « **Reply #100 on:** 2016.May.15. 02:00:16 »

Excellent work, as always

Tutus · « **Reply #101 on:** 2016.May.15. 07:12:04 »

dmacoco · « **Reply #102 on:** 2016.June.17. 03:36:33 »

is that interface will allow enterprise 64 owners to use all the programs ?

pear · « **Reply #103 on:** 2016.June.17. 06:17:25 »

Yes, why not ?

Zozosoft · « **Reply #104 on:** 2016.June.17. 09:42:49 »

Quote from: dmacoco on 2016.June.17. 03:36:33

is that interface will allow enterprise 64 owners to use all the programs ?

Not all, because some are incompatible with the EXOS 2.0

But most of will run.

Author Topic: Enterprise All-In-One interface (Read 62037 times)

Z80System

Re: Enterprise All-In-One interface

pear

Re: Enterprise All-In-One interface

Z80System

Re: Enterprise All-In-One interface

pear

Re: Enterprise All-In-One interface

Zozosoft

Re: Enterprise All-In-One interface

Z80System

Re: Enterprise All-In-One interface

pear

Re: Enterprise All-In-One interface

Zozosoft

Re: Enterprise All-In-One interface

gflorez

Re: Enterprise All-In-One interface

Ep128

Re: Enterprise All-In-One interface

Bagpuss22

Re: Enterprise All-In-One interface

Tutus

Re: Enterprise All-In-One interface

dmacoco

Re: Enterprise All-In-One interface

pear

Re: Enterprise All-In-One interface

Zozosoft

Re: Enterprise All-In-One interface