Welcome, Guest. Please login or register.


Author Topic: Enterprise All-In-One interface (Read 59744 times)

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Enterprise All-In-One interface
« Reply #105 on: 2017.December.14. 08:09:22 »
I disappeared for a while, but 2017 was very busy for me. Unfortunately, the effects of this work are hardly visible.
I spent a lot of time on repairing retro computers. Mainly ZX Spectrum.
I also lost a lot of time for the remake of the Italian Chrome 128 project.
It caused a lot of problems, and even though the clone works, I'm not happy with the result.
I wanted to squeeze out more of it.

So it's time to go back to my own projects.
Because in the last year quite a lot has happened in the equipment for EP (internal RAM, SD card reader), I have revised my publishing plans.
Only two projects will remain from the entire package of cards I have planned so far:
* Dream Turbo Card (started) and
* AMIO Card (originally it was supposed to be AllMost In-One, now more Advanced Module IO ;) ).
It will be a compilation of previous projects.

The first one will be an internal module. It will feature:
* a programmable, two-channel clock for the system and EXDOS
* Real Time Clock
* 1 MB RAM memory (optional 2MB)
* FlashROM 512KB with programmable page mapping.

The second module will be external. It will contain:
* a diskette drive controller
* 3.5" diskette drive
* built-in Gotek-HxC
* CompactFlash card slot
* maybe ZX Spectrum 48K Emulator.

This is the plan and at the same time the New Year's resolution :)
« Last Edit: 2017.December.14. 08:16:53 by pear »

Offline gflorez

  • EP addict
  • *
  • Posts: 3614
  • Country: es
    • Támogató Támogató
Re: Enterprise All-In-One interface
« Reply #106 on: 2017.December.15. 11:16:30 »
As the turbo clocks are generated internally, how will you pass the clock signal to the WD on the Exdos controller? I think you will need an extra connector to not interfere with the system clock on the expansion connector.

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Enterprise All-In-One interface
« Reply #107 on: 2017.December.15. 11:22:15 »
The second clock I will want to move out on the external edge connector instead of existing 8MHz signal.

Offline gflorez

  • EP addict
  • *
  • Posts: 3614
  • Country: es
    • Támogató Támogató
Re: Enterprise All-In-One interface
« Reply #108 on: 2017.December.15. 12:06:52 »
But then, it will interfere with other cards that need the stock 8Mhz clock.

Better ask Zozo if some of the Not/Connected pins of the expansion connector can be used.

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Enterprise All-In-One interface
« Reply #109 on: 2017.December.15. 12:19:28 »
In this case, only pins A34 or B34 remain on the edge connector.
What about the 1MHz signal? Is it also supposed to remain original?
« Last Edit: 2017.December.15. 12:23:18 by pear »

Offline Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14775
  • Country: hu
    • http://enterprise.iko.hu/
Re: Enterprise All-In-One interface
« Reply #110 on: 2017.December.15. 13:59:37 »
But then, it will interfere with other cards that need the stock 8Mhz clock.
No any card which is use it.
I suggested it this solution, because then not need to modify the EXDOS card for HD handling. (Only need WD 1772 PH 02-02 installed).

Offline Tutus

  • EP lover
  • *
  • Posts: 692
  • Country: hu
    • Enterprise 128
Re: Enterprise All-In-One interface
« Reply #111 on: 2017.December.16. 07:24:37 »
Very good news!
We are looking forward to have a card with FlashROM :)