Welcome, Guest. Please login or register.


Author Topic: Enterprise Expansion Connector (Read 4981 times)

Offline Bagpuss22

  • EP fan
  • *
  • Posts: 167
  • Country: gb
Enterprise Expansion Connector
« on: 2011.January.17. 14:03:10 »
Zozo ( or anyone )

Can you tell me if the edge connector supplies a +5v ? 

I have noticed that the expansion module converts the +9v (A/B)33 down to
+5v on (a/B)4.  I was not sure if the Enterprise had +5v on these anyway or
I had misunderstood a question from some time ago.


Thanks

Russ P.
 :ds_icon_cheesygrin:

Online Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14723
  • Country: hu
    • http://enterprise.iko.hu/
Re: Enterprise Expansion Connector
« Reply #1 on: 2011.January.17. 14:57:45 »
Can you tell me if the edge connector supplies a +5v ? 
No, on the machine is only +9V at the A33/B33 pins. The System Bus Bridge have a 7805 which is make a +5V at the A4/B4 pins (these pins on the machine is a empty).

Offline Bagpuss22

  • EP fan
  • *
  • Posts: 167
  • Country: gb
Re: Enterprise Expansion Connector
« Reply #2 on: 2011.January.18. 22:37:23 »
I thought that was the case  :ds_icon_cheesygrin:

Just wanted to conform this!

Thanks

Russ