Welcome, Guest. Please login or register.


Author Topic: Are there Enterprises without the joystick red silicon ring? (Read 5654 times)

Offline gflorez

  • EP addict
  • *
  • Posts: 3615
  • Country: es
    • Támogató Támogató
I am actually installing EXOS2.4 on a EP 128 issue 6, never opened, and to my surprise, the Joystick cross press directly and dangering over the membrane points.

Externally the feel is normal, there is no looseness on the stick, but I think that I must find some elastic material to supply the ring.

This German keyboard EP comes froM Hungary, in a very good state.
« Last Edit: 2017.May.24. 22:11:42 by gflorez »

Offline Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14779
  • Country: hu
    • http://enterprise.iko.hu/
Re: Are there Enterprises without the joystick red silicon ring?
« Reply #1 on: 2017.May.24. 23:48:30 »
No without red ring. The keyboard can be removed without need to break the warranty label. Probably someone earlier removed it for cleaning, and forgot to put back the red ring.

Originally the rubber keymat also used for the joystick, but it didn't work properly, then it was replaced with the red ring, started at 1984 October 30.
« Last Edit: 2019.April.16. 21:41:50 by szipucsu »

Offline gflorez

  • EP addict
  • *
  • Posts: 3615
  • Country: es
    • Támogató Támogató
Re: Are there Enterprises without the joystick red silicon ring?
« Reply #2 on: 2017.May.25. 00:42:52 »
As always you are right. The good part is that the owner didn't break the membrane, it still works perfect.

Then I will create a replica of the ring.


Soon I will show you the serial number and the name of the final owner.
« Last Edit: 2017.May.25. 00:51:56 by gflorez »

Offline gflorez

  • EP addict
  • *
  • Posts: 3615
  • Country: es
    • Támogató Támogató
Re: Are there Enterprises without the joystick red silicon ring?
« Reply #3 on: 2017.May.25. 12:30:15 »
The original ring measures 42,5mm outer diameter, 26,5mm inner, and 2,5mm thick.

I have found one made of gum that will suit.

It is only 2mm thick, but a little harder. The diameters are similar.

It will last forever....

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Are there Enterprises without the joystick red silicon ring?
« Reply #4 on: 2017.May.26. 08:41:02 »
Will there be fit standard 1.5 inch rubber gasket ?

Offline gflorez

  • EP addict
  • *
  • Posts: 3615
  • Country: es
    • Támogató Támogató
Re: Are there Enterprises without the joystick red silicon ring?
« Reply #5 on: 2017.May.26. 10:26:43 »
Exactly, I have put an oil cap gasket made of synthetic gum, but 1,5mm is not enough. Mine is 2mm and still has an almost unnoticeable gap in the movement.

The original ring is 2,5mm thick. Maybe more than that could break the case when its screws are tighten.