Enterprise Forever
:UK => Hardware => Topic started by: John Fante on 2020.September.12. 19:50:19
-
I am in the proces of recapping my Egyptian EP64 board.
I am out of horisontal 10 ferrit caps so I have to switch to vertical.
However I am a bit unsure if I am putting them in correctly.
In short my questions is if the end with the curve on the Phillips caps on a EP64 are +.
As far as I can see from my research it is but I want to be sure before I test.
The old cap is here (https://www.dropbox.com/s/qhr1h8h6osw1s45/Cap-old.jpeg?dl=0). The end with the curve is in the bottom of the picture.
Thank you in advance. Judge have posted a picture of his recapped board but I must confess that I can't really see what end is + on his caps. I am a cap NOOB :)
-
In the attached picture I marked the poles of the electrolyte capacitor.
-
Great! :razz: Thank you very much!