Welcome, Guest. Please login or register.


Author Topic: Noise on RGB signal. Suggestions? (Read 229 times)

Offline John Fante

  • EP fan
  • *
  • Posts: 136
  • Country: dk
  • OS:
  • Mac OS X 10.15.6 Mac OS X 10.15.6
  • Browser:
  • Chrome 85.0.4183.102 Chrome 85.0.4183.102
    • View Profile
Noise on RGB signal. Suggestions?
« on: 2020.September.15. 21:18:39 »
I managed to recap my "new" Egyptian EP and update to EXOS 2.4 :)

The machine works but I still have a strange noise problem on the RGB signal. See here.

Any suggestions how to find the source for that?

As far as I can see the components are fine but maybe something "broke" when I turned it on the fist time?

At first boot the machine was dead. Red LED on but no picture. With the help from this thread i managed to get it going.

The 5V rail was fine but 12V was way too low which cause the TR2 to fry (maybe killed by a bad C9). I replaced TR2 and C9 and the machine came to life :) But now I have a noise problem (see video).

To cure that I then recapped the board (took a while :) ). That is finished now but the noise is still there.

Any suggestions to where I should start looking for the error?
« Last Edit: 2020.September.16. 08:46:00 by John Fante »

Offline John Fante

  • EP fan
  • *
  • Posts: 136
  • Country: dk
  • OS:
  • Mac OS X 10.15.6 Mac OS X 10.15.6
  • Browser:
  • Chrome 85.0.4183.102 Chrome 85.0.4183.102
    • View Profile
Re: Noise on RGB signal. Suggestions?
« Reply #1 on: 2020.September.24. 12:57:38 »
A quick BUMP :)

Any suggestions would be highly appreciated :bow: