Welcome, Guest. Please login or register.


Author Topic: M-Slot (MSX cartridge adapter) (Read 4803 times)

Online gflorez

  • EP addict
  • *
  • Posts: 2329
  • Country: es
  • OS:
  • Windows XP Windows XP
  • Browser:
  • Firefox 52.0 Firefox 52.0
    • View Profile
Re: M-Slot (MSX cartridge adapter)
« Reply #60 on: 2018.July.23. 15:16:57 »
The second batch of 10 bus expanders arrived. I have 5 units already compromised on Spain, so it left another 5 bus expanders and 5 M-Slots to sell.

This second batch has some modifications proposed by Zozo:

-A 9 pin header to put pull-ups to the Z80 Data bus.

-A point on every slot to feed +9v or ground on 33A/B pins for classic extension boards.

I also have put a little hole on every corner just in case the PCB needs to be screwed into a box.

The price is still the same, 15 Euro the bus expander and 10 Euro the M-Slot (+postage). Due to the long distances, better I will provide the units mounted and tested.
« Last Edit: 2018.July.23. 15:58:45 by gflorez »

Offline Zozosoft

  • EP addict
  • *
  • Posts: 12969
  • Country: hu
  • OS:
  • Windows NT 10.0 Windows NT 10.0
  • Browser:
  • Firefox 61.0 Firefox 61.0
    • View Profile
    • http://enterprise.iko.hu/
Re: M-Slot (MSX cartridge adapter)
« Reply #61 on: 2018.July.23. 21:05:58 »
-A 9 pin header to put pull-ups to the Z80 Data bus.

-A point on every slot to feed +9v or ground on 33A/B pins for classic extension boards.
:smt038

Online gflorez

  • EP addict
  • *
  • Posts: 2329
  • Country: es
  • OS:
  • Windows XP Windows XP
  • Browser:
  • Firefox 52.0 Firefox 52.0
    • View Profile
Re: M-Slot (MSX cartridge adapter)
« Reply #62 on: 2018.September.10. 09:17:25 »
Somebody asked me on August about a Bus expander, but I don't remember who was.

I still have some mounted units of both the bus Expanders and the M-Slot, ready to send.

More batches will be ordered on demand.

Offline pear

  • EP lover
  • *
  • Posts: 672
  • Country: pl
  • Z80 only
  • OS:
  • Windows NT 6.3 Windows NT 6.3
  • Browser:
  • Firefox 61.0 Firefox 61.0
    • View Profile
Re: M-Slot (MSX cartridge adapter)
« Reply #63 on: 2018.September.10. 10:45:36 »
If it stays, I would, however, I'll take the set (both units).
I do not have time to do it myself.

Online gflorez

  • EP addict
  • *
  • Posts: 2329
  • Country: es
  • OS:
  • Windows XP Windows XP
  • Browser:
  • Firefox 52.0 Firefox 52.0
    • View Profile
Re: M-Slot (MSX cartridge adapter)
« Reply #64 on: 2018.September.10. 12:35:38 »
Ok, I will do the packet and will put you a PM when I know the total price.

Online gflorez

  • EP addict
  • *
  • Posts: 2329
  • Country: es
  • OS:
  • Windows 7/Server 2008 R2 Windows 7/Server 2008 R2
  • Browser:
  • Firefox 62.0 Firefox 62.0
    • View Profile
Re: M-Slot (MSX cartridge adapter)
« Reply #65 on: 2018.September.19. 01:43:30 »
A little add-on has been designed by my friend Wilco. It is a clone of the Enterprise external connector that would be connected at the rear connector of the bus expander.



The components are only a narrow PCB and a male SIL 90 degrees connector, so it will be very cheap and easy to made.

It will allow to plug there your trusty EXDOS direct-connection interface, like the compact clone from Pear, the Microteam or the Spanish EXDOS clones.

Not for the original or Hungarian EXDOS(through Bridgeboard), logically, these can be plugged on one of the three slots(both as SIL or as EDGE, ask me more about this if you are interested).

The benefit is that you will be able to expand your Enterprise without losing the use of your old floppy interface.

It will take only a month to finish this adapter, the usual time from order the PCBs, to receive, mount and finish them.

From now on I will sell it in a bundle with the bus expander as a feature. I can also sell it separately to the users that already own the bus expander, almost all Hungarians, so better if I send only a pack of them to Zozo's.