Welcome, Guest. Please login or register.


Author Topic: Creating EXDOS card clone (Read 105553 times)

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Creating EXDOS card clone
« Reply #75 on: 2016.September.11. 18:44:13 »
All original parts cleaned and restored.

Offline sinclair200

  • Beginner
  • *
  • Posts: 47
  • Country: es
Re: Creating EXDOS card clone
« Reply #76 on: 2016.September.21. 00:45:05 »
I have already received the ExDOS controller




« Last Edit: 2017.September.24. 01:01:25 by sinclair200 »

WANTED: SAM COUPE

Offline Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14722
  • Country: hu
    • http://enterprise.iko.hu/
Re: Creating EXDOS card clone
« Reply #77 on: 2016.September.21. 06:55:15 »
What is the serial number of the card?

What does the red button do on the System Bus Bridge?
« Last Edit: 2016.September.23. 14:40:05 by szipucsu »

Offline Tutus

  • EP lover
  • *
  • Posts: 679
  • Country: hu
    • Enterprise 128
Re: Creating EXDOS card clone
« Reply #78 on: 2016.September.21. 09:39:53 »
I have already received the ExDOS controller

Beautiful :D

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: Creating EXDOS card clone
« Reply #79 on: 2016.September.21. 10:13:07 »
The red button is unconnected, with no traces of once being welded.


Offline sinclair200

  • Beginner
  • *
  • Posts: 47
  • Country: es
Re: Creating EXDOS card clone
« Reply #80 on: 2016.October.02. 02:31:28 »
What is the serial number of the card?

What does the red button do on the System Bus Bridge?

Serial number: 001676
The red button is not connected

WANTED: SAM COUPE

Offline sinclair200

  • Beginner
  • *
  • Posts: 47
  • Country: es
Re: Creating EXDOS card clone
« Reply #81 on: 2016.October.02. 02:35:00 »
All original parts cleaned and restored.

An excellent job

WANTED: SAM COUPE

Offline Jungsi

  • Beginner
  • *
  • Posts: 25
  • Country: de
    • Jungsis Corner
Re: Creating EXDOS card clone
« Reply #82 on: 2016.November.08. 19:31:10 »
Is there a place to download some disk images?
Jungsis Corner - http://www.jungsi.de

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: Creating EXDOS card clone
« Reply #83 on: 2016.November.08. 19:50:53 »
On the download section you can find a collection of images, but a little outdated.

Offline geco

  • EP addict
  • *
  • Posts: 7082
  • Country: hu
    • Támogató Támogató
Re: Creating EXDOS card clone
« Reply #84 on: 2016.November.09. 08:38:00 »
or you can find on EP128.hu under Disk-image file-ok

Offline szipucsu

  • Global Moderator
  • EP addict
  • *
  • Posts: 9898
  • Country: hu
    • Támogató Támogató
    • Webnyelv.hu - Tanuljunk nyelveket!
Re: Creating EXDOS card clone
« Reply #85 on: 2016.November.13. 19:54:07 »
or you can find on EP128.hu under Disk-image file-ok
That page has an English version too.
100 SOUND SOURCE 2,STYLE 128,PITCH 25.2,SYNC 1
110 SOUND PITCH 25,SYNC 1
120 ! Videos

Offline sinclair200

  • Beginner
  • *
  • Posts: 47
  • Country: es
Re: Creating EXDOS card clone
« Reply #86 on: 2017.February.16. 03:08:32 »
Zozo, I think it has a large collection of Enterprise and peripherals.
I would not have by chance the original box and the corks of the Exdos controller to sell me ....?

WANTED: SAM COUPE

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Creating EXDOS card clone
« Reply #87 on: 2018.February.04. 13:17:37 »
Since several people have been asking me for some time about able of purchase the EXDOS interface, I have refreshed the project.
It is even more compact, more compatible with newer drives and commonly used interlaced tape.
Optionally is available a connector for the second card (EPNET or ZX Spectrum Emulator).
The spacing of mounting holes in the card is compatible with the hole spacing in the 3.5" drive.
It will be a simple interface, without the fireworks that I am planning for the AMIO card.

For now, however, the Turbo card has priority.
In addition, the PCB contractor will celebrate the New Year almost until the end of February.
So it will be necessary to wait for the PCBs.

Offline Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14722
  • Country: hu
    • http://enterprise.iko.hu/
Re: Creating EXDOS card clone
« Reply #88 on: 2018.February.04. 15:31:51 »
One extra easy added: if you use the original schematic, then the ROM socket is decoded to 20-2Fh. Then possible use ROM chips up to 256K just add a 32 pin socket. But if you keep the 28 pin, then please add A15 to pin1.

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Creating EXDOS card clone
« Reply #89 on: 2018.February.04. 17:50:10 »
Actually, why not ? :)
Let it be DIP32.