And about leaving your "old EP" without the internal ROM, you say that you plan to inject it with the SF3.Ok, remember to put on the INI file the lineCode: [Select]ROMEXOS_ENA=ONand the lineCode: [Select]ROM[#00] =SD:EXOS2.4.ROMRemember that your old EP will only start with the SF3 connected.
ROMEXOS_ENA=ON
ROM[#00] =SD:EXOS2.4.ROM
************************************************************************************ * SF3 INI FILE ************************************************************************************ *Wifi settings. Up to 5 wifi providers can be put here, * the first has the gratest priority @WIFI_PASS=XXX@WIFI_SSID=YYYY WIFI_CONNECT ************************************************************************************ *TMTnet settingsTMTNET_USERID=???TMTNET_PASS=ZZZ************************************************************************************ *EPRAM[#05-#07]EPRAM[#08-#1F]EPRAM[#30-#F7]* The Roms can be in any place of the SD or on a web pageROMEXOS_ENA=ONROM[#00] =SD:ROMS/exos24uk.ROMROM[#60] =SD:ROMS/SF3BOOT.ROM*ROM[#61] =SD:ROMS/SPEMU128.ROM*ROM[#64] =SD:ROMS/epd19uk.rom*ROM[#66] =SD:forth.rom*ROM[#67] =HTTP:www.tmtlogic.com/cyrus.rom************************************************************************************ * Audio settings SYMAMP for symbos audio *AUDIO= PLAYMS AUDIO= SYMAMP ************************************************************************************
Thank you for all the great advise Just one thing. On my present machine the ROM is not wired to the expansion port but to the U6 chip. See here.The wire to the expansion port is wired like this.Is this an alternative way of doing it?