Now I should remember which is the second If I do not find out, I will check it again

Hi,

I think the versionb.128s sounds better . Not perfect, but nicer than the first snapshot.

Hervé

thank you for your help
It is another test version

This version works in the following way: if noise value of AY register 6 is 01 then it plays 30kHz noise on enterprise noise channel, if AY reg 6>01 then stops channel 3 and plays polynomial distortion with value AY reg 6 x 4 on it (it is similar to sound of noise channel), only channel 0 and 1 plays noise with >01 value, and if noise value <=1 then channel 3 is restored.
Is this version good, or I should involve noise channel for all noise values?

Hi Gecco,

Some tunes are good to me now (tunes 1 and 9). Other sound a little strange but I think modifying a little bit the instruments that might be ok too. I will make some more updates on the music files.

Hervé

I modified littlebit the tunes Noises were inserted back to the instruments, and in one instrument it was decreased from 3 to 1 (original was 130000, new 110000)
I will create a version, which uses noise channel

Hello,

Sorry for the delay . I have updated a little bit the music, thinking it would fit better the noise effect. I have shorten some "drums" and their volume is a little bit lower. I hope with that changes the tunes should be now good.

I have listened your tests with only noise effect, that's a little bit hard to choose. But, I think I prefer this one : v2vol30dis4ay6.ep128s

Time to go to bed...

Hervé

Here are 2 test versions from the newest musuc version

Hello Gecco,

I am on holidays, so I will not update the music before next week. That's now close to be perfect, but I
think there is still works for me on one or two tunes. Sorry for this delay .

Hervé

Bonjour Hervé

No problem, I am waiting for next update
Have a nice holiday:)

Sub_hunter V5 in easter egg