Enterprise Forever
:UK => Hardware => Display => Topic started by: Arablover on 2006.October.08. 18:14:56
-
Does anyone have the pinouts for RGB and composite video?
Somewhere I can get the edge connector?
Or somewhere where I can buy a completed cable to SCART?
Regards.
Jeremy
-
Hi there,
I can supply some edge connector if you need.
I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself :)
Where in the world are you?
Regards
Russ.
-
Originally there is no colour composite video output on the EP, only monochrome.
But if you would like to use RGB SCART, then you can use this:
(http://enterpriseforever.com/userpix/5_enterface14_1.gif)
2 - right channel
6 - left channel
7 - blue
8 - 12V (to switch on the TV)
11 - green
15 - red
20 - CSYNC
5, 9 - GND
-
This is the diagram I am using to make SCART leads.
Russ P.
:D
-
Enterprise pinouts (http://ep.homeserver.hu/Dokumentacio/Konyvek/EXOS_2.1_technikal_information/hardware/pinout.html)
-
'Application Note 9'
States that you should run a 100 ohm resistor between pins 2 and 6
on the SCART to make sure that is the audio is MONO then you
get MONO rather than just the LEFT channel.
regards
Russ P.
:D
-
Hi there,
I can supply some edge connector if you need.
I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself :)
Where in the world are you?
Regards
Russ.
Could you tell me where you got the 14 way edge connectors as i am trying to make up a cable too.