Enterprise Forever

:UK => Hardware => Display => Topic started by: Arablover on 2006.October.08. 18:14:56

Title: RGB and composite video pinouts.
Post by: Arablover on 2006.October.08. 18:14:56
Does anyone have the pinouts for RGB and composite video?

Somewhere I can get the edge connector?

Or somewhere where I can buy a completed cable to SCART?

Regards.


Jeremy
Title: RGB and composite video pinouts.
Post by: Bagpuss22 on 2006.October.09. 16:09:17
Hi there,

I can supply some edge connector if you need.

I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself  :)

Where in the world are you?

Regards

Russ.
Title: RGB and composite video pinouts.
Post by: Povi on 2006.October.09. 19:15:28
Originally there is no colour composite video output on the EP, only monochrome.
But if you would like to use RGB SCART, then you can use this:
(http://enterpriseforever.com/userpix/5_enterface14_1.gif)
 2 - right channel
 6 - left channel
 7 - blue
 8 - 12V (to switch on the TV)
11 - green
15 - red
20 - CSYNC
5, 9  - GND
Title: RGB and composite video pinouts.
Post by: Bagpuss22 on 2006.October.09. 22:27:08
This is the diagram I am using to make SCART leads.

Russ P.
 :D
Title: RGB and composite video pinouts.
Post by: Zozosoft on 2006.October.10. 10:17:46
Enterprise pinouts (http://ep.homeserver.hu/Dokumentacio/Konyvek/EXOS_2.1_technikal_information/hardware/pinout.html)
Title: RGB and composite video pinouts.
Post by: Bagpuss22 on 2006.October.10. 13:00:17
'Application Note 9'

States that you should run a 100 ohm resistor between pins 2 and 6
on the SCART to make sure that is the audio is MONO then you
get MONO rather than just the LEFT channel.


regards

Russ P.
 :D
Title: Re: RGB and composite video pinouts.
Post by: jackleather on 2007.March.09. 13:53:39
Hi there,

I can supply some edge connector if you need.

I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself  :)

Where in the world are you?

Regards

Russ.


Could you tell me where you got the 14 way edge connectors as i am trying to make up a cable too.