Author Topic: RGB and composite video pinouts. (Read 20127 times)

Arablover · « **on:** 2006.October.08. 18:14:56 »

Does anyone have the pinouts for RGB and composite video?

Somewhere I can get the edge connector?

Or somewhere where I can buy a completed cable to SCART?

Regards.

Jeremy

Bagpuss22 · « **Reply #1 on:** 2006.October.09. 16:09:17 »

Hi there,

I can supply some edge connector if you need.

I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself

Where in the world are you?

Regards

Russ.

Povi · « **Reply #2 on:** 2006.October.09. 19:15:28 »

Originally there is no colour composite video output on the EP, only monochrome.
But if you would like to use RGB SCART, then you can use this:

2 - right channel
6 - left channel
7 - blue
8 - 12V (to switch on the TV)
11 - green
15 - red
20 - CSYNC
5, 9 - GND

Bagpuss22 · « **Reply #3 on:** 2006.October.09. 22:27:08 »

This is the diagram I am using to make SCART leads.

Russ P.

Zozosoft · « **Reply #4 on:** 2006.October.10. 10:17:46 »

Enterprise pinouts

Bagpuss22 · « **Reply #5 on:** 2006.October.10. 13:00:17 »

'Application Note 9'

States that you should run a 100 ohm resistor between pins 2 and 6
on the SCART to make sure that is the audio is MONO then you
get MONO rather than just the LEFT channel.

regards

Russ P.

jackleather · « **Reply #6 on:** 2007.March.09. 13:53:39 »

Quote from: Bagpuss22 on 2006.October.09. 16:09:17

Hi there,

I can supply some edge connector if you need.

I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself

Where in the world are you?

Regards

Russ.

Could you tell me where you got the 14 way edge connectors as i am trying to make up a cable too.