Welcome, Guest. Please login or register.


Author Topic: RGB and composite video pinouts. (Read 9503 times)

Offline Arablover

  • Newbie
  • Posts: 3
    • View Profile
RGB and composite video pinouts.
« on: 2006.October.08. 18:14:56 »
Does anyone have the pinouts for RGB and composite video?

Somewhere I can get the edge connector?

Or somewhere where I can buy a completed cable to SCART?

Regards.


Jeremy

Offline Bagpuss22

  • EP fan
  • *
  • Posts: 162
  • Country: gb
    • View Profile
RGB and composite video pinouts.
« Reply #1 on: 2006.October.09. 16:09:17 »
Hi there,

I can supply some edge connector if you need.

I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself  :)

Where in the world are you?

Regards

Russ.

Offline Povi

  • EP addict
  • *
  • Posts: 1778
  • Country: hu
    • View Profile
    • http://povi.fw.hu
RGB and composite video pinouts.
« Reply #2 on: 2006.October.09. 19:15:28 »
Originally there is no colour composite video output on the EP, only monochrome.
But if you would like to use RGB SCART, then you can use this:

 2 - right channel
 6 - left channel
 7 - blue
 8 - 12V (to switch on the TV)
11 - green
15 - red
20 - CSYNC
5, 9  - GND
*** Speicherplatz zu klein

Offline Bagpuss22

  • EP fan
  • *
  • Posts: 162
  • Country: gb
    • View Profile
RGB and composite video pinouts.
« Reply #3 on: 2006.October.09. 22:27:08 »
This is the diagram I am using to make SCART leads.

Russ P.
 :D

Offline Zozosoft

  • EP addict
  • *
  • Posts: 13177
  • Country: hu
    • View Profile
    • http://enterprise.iko.hu/
RGB and composite video pinouts.
« Reply #4 on: 2006.October.10. 10:17:46 »

Offline Bagpuss22

  • EP fan
  • *
  • Posts: 162
  • Country: gb
    • View Profile
RGB and composite video pinouts.
« Reply #5 on: 2006.October.10. 13:00:17 »
'Application Note 9'

States that you should run a 100 ohm resistor between pins 2 and 6
on the SCART to make sure that is the audio is MONO then you
get MONO rather than just the LEFT channel.


regards

Russ P.
 :D

Offline jackleather

  • Beginner
  • *
  • Posts: 29
  • Country: gb
    • View Profile
Re: RGB and composite video pinouts.
« Reply #6 on: 2007.March.09. 13:53:39 »
Hi there,

I can supply some edge connector if you need.

I am currently building a SCART lead for mine so would be
happy to produce the extra so that you can make one
yourself  :)

Where in the world are you?

Regards

Russ.


Could you tell me where you got the 14 way edge connectors as i am trying to make up a cable too.