Standart loader (without music) working good from tape.

Cool, thank you very much, at least it works, i tried with my laptop, but headphone with stereo jack remained silent. I do not know why the remote was not released, i used the exos rom tape load routine, i will try to check on the emulator, but it worked there.

On my machine tape loading didn't work correctly: after Commodore title screen REM didn't release cassette recorder (to read name and load .prg file). If I unplug REM-wire manually - loading continues. I can record video if you need.

I found the problem, remote control worked, just for REM2 , because at EXOS 1 (open file) the routine gets C:00 when REM1 should be handled, i did not set C to 00h in my modified EXOS open file routine, and it started with C:16h, therefore remote control handled on REM2. The problem has been corrected, and the file has been changed in 1st post.

Megtaláltam a problémát, a távirányítás működött, de a REM2-n , mert az EXOS 1 (fájl megnyitása) rutin C:00-t kap REM1 esetén, nem állítottam a C-t 00h-ra a módosított EXOS fájl nyitása rutinban, így C:16h értékkel indult, így a távirányítás a REM2-n zajlott. Probléma megoldva, a file az első hozzászólásban le lett cserélve a frissre.

Javítás helyett csinálhattál volna egy cetlit a kazetta tokjába, hogy még sokkal nyújabb lóding sístém, kösd a REM2-be a magnót

Now I understand why everything was ok in the emulator.

Now i understand also, but when you reported the error, i could not imagine. Now i know that ep128emu hndles the 2 remote as one, if any is enabled, then ep128emu enables the tape.

Video: https://www.youtube.com/watch?v=cSfx-C0ePpA

Ez a zenélős magnózás hogyan működik?