Welcome, Guest. Please login or register.


Author Topic: Egér (Read 18117 times)

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Egér
« Reply #15 on: 2018.March.27. 16:25:46 »
Lengyelországban azt mondják: "Ha minden út nem sikerül, olvassa el a használati utasítást" ;)
Problémák esetén kérdezd meg habozás nélkül.
-------------------------
In Poland they say: "When all the ways fail, read the instruction manual" ;)
In case of problems, ask without hesitation.

Offline Povi

  • EP addict
  • *
  • Posts: 2296
  • Country: hu
    • http://povi.fw.hu
Re: Egér
« Reply #16 on: 2018.March.27. 17:34:16 »
Lengyelországban azt mondják: "Ha minden út nem sikerül, olvassa el a használati utasítást" ;)
Problémák esetén kérdezd meg habozás nélkül.
-------------------------
In Poland they say: "When all the ways fail, read the instruction manual" ;)
In case of problems, ask without hesitation.
Hi Pear,
I am not sure, if it is an original Polish phrase! :-)
I've got your package today, thanks!

I was wondering, if there is any special jumper setting is needed to use the joysticks? First time it was not working, now I tried again, and it works now, (mouse is OK, also), so it seems, it was not connected properly to the Enterprise...

*** Speicherplatz zu klein

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Egér
« Reply #17 on: 2018.March.27. 17:48:19 »
If DIPswitch DS2 is OFF, the EnterMice is in mode which the mouse is use as a joystick.
Mouse movement are translated to the joystick directions.
In this mode the port of Joystick 1 is disabled.

Offline szipucsu

  • Global Moderator
  • EP addict
  • *
  • Posts: 9898
  • Country: hu
    • Támogató Támogató
    • Webnyelv.hu - Tanuljunk nyelveket!
Re: Egér
« Reply #18 on: 2018.March.27. 17:54:11 »
Próbálja ki az EnterMice wikit.(részben lefordítva)
A magyarra fordítást folytatnám, de egyszer kiderült, egy része le van már fordítva, csak nem az oldalon van. Ha valaki kicserélné magyarra a már lefordított többi részt is, folytathatnám onnan.
100 SOUND SOURCE 2,STYLE 128,PITCH 25.2,SYNC 1
110 SOUND PITCH 25,SYNC 1
120 ! Videos

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Egér
« Reply #19 on: 2018.March.27. 18:16:07 »
OK, befejezem
--------
OK, I will complete

EDIT:
I think the translator has misrepresented something again.
The English version is up to date and the same text is in the Hungarian version in untranslated passages.
« Last Edit: 2018.March.27. 18:32:12 by pear »

Offline szipucsu

  • Global Moderator
  • EP addict
  • *
  • Posts: 9898
  • Country: hu
    • Támogató Támogató
    • Webnyelv.hu - Tanuljunk nyelveket!
Re: Egér
« Reply #20 on: 2018.March.27. 18:32:20 »
OK, befejezem
--------
OK, I will complete
I mean the Hungarian version. Somebody translated a lot from this text but not on Wiki.
100 SOUND SOURCE 2,STYLE 128,PITCH 25.2,SYNC 1
110 SOUND PITCH 25,SYNC 1
120 ! Videos

Offline pear

  • EP lover
  • *
  • Posts: 825
  • Country: pl
  • Z80 only
    • Támogató Támogató
Re: Egér
« Reply #21 on: 2018.March.27. 18:34:14 »
I would love to do it, but the automatic translator can not deal with Hungarian quite well (by the way it can not handle any language :ds_icon_cheesygrin: ).

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: Egér
« Reply #22 on: 2018.March.27. 20:19:55 »
First time it was not working, now I tried again, and it works now, (mouse is OK, also), so it seems, it was not connected properly to the Enterprise...

The edge connectors are prone to get dirty, you can use a contact cleaner spray. Also, try to centre the three connectors on their plug holes before inserting the adapter.

On the other side, the repeated insertion/extraction movement(what you have done...) cleans the edge connectors surface.
« Last Edit: 2018.March.27. 20:29:14 by gflorez »

Offline Judge

  • EP lover
  • *
  • Posts: 677
  • Country: hu
Re: Egér
« Reply #23 on: 2018.March.27. 20:31:53 »
Na ez az, én égen földön nem találok olyan egeret ami mûködne a Mészáros féle kártyával...
Mert nem kérdeztél engem. :)  Nekem kettő is van. :cool:
Sőt az előtérben lévő "kocka" alakú, még az eredeti konfigomból maradt és  a Mészáros féle egérkártyával működött.
Úgy emlékszem, annak a kapcsolónak az oldalán sok szerepe volt ebben.

[ Guests cannot view attachments ]

Üdv.Judge

Offline gflorez

  • EP addict
  • *
  • Posts: 3607
  • Country: es
    • Támogató Támogató
Re: Egér
« Reply #24 on: 2018.March.27. 20:42:37 »
Judge: hogy milyen programokat használ a Mészáros egér kártyával?

Használja a Universal Mouse Driver-t?

---------------------------------------


To Judge: what programs do you use with the Mészáros mouse card?

Do you use the Universal Mouse Driver?

Offline Povi

  • EP addict
  • *
  • Posts: 2296
  • Country: hu
    • http://povi.fw.hu
Re: Egér
« Reply #25 on: 2018.March.27. 20:45:45 »
Mi a helyzet a HEASS-szal? Állítólag az is használja az egeret, ha van EPDOS 2.0.
Ez most működik az új egérrel? Vagy az EPDOS-féle egérvezérlő nem kompatibilis az entermice-szal?
(tudom, próbáljam ki)
*** Speicherplatz zu klein

Offline Judge

  • EP lover
  • *
  • Posts: 677
  • Country: hu
Re: Egér
« Reply #26 on: 2018.March.27. 20:56:55 »
Judge: hogy milyen programokat használ a Mészáros egér kártyával?

Használja a Universal Mouse Driver-t?

---------------------------------------


To Judge: what programs do you use with the Mészáros mouse card?

Do you use the Universal Mouse Driver?

I no longer have the Mészáros mouse card :(
Üdv.Judge

Offline Zozosoft

  • Global Moderator
  • EP addict
  • *
  • Posts: 14722
  • Country: hu
    • http://enterprise.iko.hu/
Re: Egér
« Reply #27 on: 2018.March.27. 21:41:16 »
Ez most működik az új egérrel? Vagy az EPDOS-féle egérvezérlő nem kompatibilis az entermice-szal?
Az nem kompatibilis. Majd kéne belőle új verziót csinálni...

Offline Povi

  • EP addict
  • *
  • Posts: 2296
  • Country: hu
    • http://povi.fw.hu
Re: Egér
« Reply #28 on: 2019.March.24. 19:34:16 »
nézegetem a soros-kátyát:
http://ep128.hu/Ep_Hardware/Pic/Rajz_Sorosk.gif

a 8251 RXRDY lába rá van kötve a Z80 INT lábára
azt értem, miért van ott az U4D iverter, mert a RXRDY high active, de az Z80 /INT lába meg pont low active (ez a helyes kifejezés?)

viszont mit keres ott D1 dióda? annak mi értelme van?

a másik meg: ha a Z80 /INT lábát lehúzzuk nullára, akkor mi történik? gondolom, ráugrik 0x38-ra, mert IM1 módban vagyunk. Na de itt honnét fogja tudni a megszakítási rutin, hogy a soros kártya okozta a megszakítást?
*** Speicherplatz zu klein

Offline IstvanV

  • EP addict
  • *
  • Posts: 4822
Re: Egér
« Reply #29 on: 2019.March.24. 19:43:13 »
viszont mit keres ott D1 dióda? annak mi értelme van?

Azért, hogy csak "lehúzni" tudja az INT-et, mivel a 74LS04 nem nyitott kollektoros kimenetű.

Quote
Na de itt honnét fogja tudni a megszakítási rutin, hogy a soros kártya okozta a megszakítást?

Ha a kártyán nem lehet tesztelni valahogyan, akkor a B4h porton ha nincs más aktív megszakítás forrás, akkor a kártya okozta. De soros adatátvitel közben valószínűleg egyébként is célszerű tiltani a többi megszakítást, ha azokat lassú rutinok kezelnék.
« Last Edit: 2019.March.24. 20:04:07 by IstvanV »